Change Drum Soon MFC 9700/9800 Why does my Brother MFC still display CHANGE DRUM SOON

Brother Support

Don't just go out and buy the least expensive printer/copier in the store. Because most of the time the least expensive machine will come with the most expensive printing supplies. And that's exactly what the manufactures want you to do. Call Crazy Inkjets and let one of our friendly staff members help you decide what machine is best for your particular needs. And most importantly, your pocket book when it comes to buying those printing supplies.

 

Contact us

Updated to macOS High Sierra? View our full list of supported models

For HL Models: 

1 - Open the front cover
2 - Locate the control panel [ BUTTON ] under the led lights


3 - Press the control panel button until all the lights are lit the release the button. The drum counter is now reset.
4 - Close the door. You are ready to print. 


For MFC Models 

1 - Open the front cover and press the [ CLEAR ] button.
2 - The screen will ask if a 
"New Drum Was Installed"
" 1 for Yes 2 for No"

3 - Press the [ 1 ] key to select yes. 
4 - The scree should respond with "selection accepted" 
5 - The drum counter is now reset. Close the door. You are ready to print 

Current Reviews: 18827
Write Review